Case Study: My Experience With Rivets

The Wonderful Things Rivet Fasteners Can Offer to Industries

Rivet is an old form of fastener which is still used today. This has been introduced during the two World Wars that is used to construct airplanes and boats. Surprisingly, this is still used up to this modern days.

To build large iron structures and ships, hot rivets help put up things together. Joining two pieces of either iron or steel using rivet is done once the rivet is heated that it turns into red hot. To blind the rivet over the hole, one person hits the other end while the other holds it using metal tongues. As the rivet cools down, it will start to contract that pulls the two pieces tighter together.

The heat and hammering present in the process can be very complicated and dangerous. To get the hot rivets come with complications. Are you familiar with the skyscrapers building in New York back in 1920’s? It is never easy to get the hot rivets that high.

However, things have changed today since rivets used are already cold rivets which size is relatively small than the old rivets. For more faster and quality construction, the steel hulls are welded together. When it comes to bridges, they are bolted together using fasteners.

Cold rivets are a more modern type which can be utilized by someone who is doing a DIY project. Visit your nearest DIY store and you will sure find a pop riveting kit. The rivet will simply tighten itself using a moderate pressure and after placing the pop rivets through the hole. Another use of the riveting gun is to crop off the rivet’s excess part.

These rivets are still very useful in most aircraft industries today. For several years already, rivets have been a very useful tool to fasten and hold pieces together.

All of these just show how rivets are able to withstand the test of time.

The use of rivet tools has allowed different industries to hold and fix things together. Using this fastener is a good alternative when welding doesn’t work. You can use rivets when joining a plywood with metal sheets. Rivets are perfect for materials that are easy to deform. Depending on where to use it, there are several sizes to choose from.

Since rivets are known to be strong, they are used in different industries and for different purposes all over the world. Nowadays, there are also several rivet manufacturers that are producing quality fasteners. Rivets are known for its accessibility, cost and strength.